Immersion Heater

Product Details:

Tubular Direct Immersion Heaters are installed in a tank or container to heat liquids. Since the liquid is in direct contact with the heating elements the heat transfer efficiency is much better than indirect heating and is almost 100%.

These Immersion heaters are one of the most widely used methods for heating liquids (such as water, oil, heat transfer fluid and corrosive solutions). Designed for use in tanks and pressurized vessels, they are easy to install and maintain.  The direct immersion method is energy efficient and can be easily monitored and controlled. These heaters are available with heating elements made of copper, steel, stainless steel 304 /316, cast iron, titanium, and PFA coated. A wide selection of kilowatt ratings, shapes and mounting options are available to suit many different types of applications.

Applications:

• Deionized water

• Clean water

• Potable water

• Process water

• Industrial water rinse tanks

• Vapor degreasers

• Hydraulic oil

• Crude Oil

• Viscous hydrocarbons to bring them to pumpable temprature. 

• Lubricating oils at API specified watt densities

• Air and gas Heating

• Caustic solutions

• Chemical Baths

Additional Information:

• Production Capacity: 96000
• Delivery Time: 2 -4 weeks
• Packaging Details: Crate or Wooden Box Packing as per client requirement

Product Details:

Screw Plug Immersion Heater are used to reduce the viscosity of HFO to make It easily pumpable and also to raise to the required temperature for Burner.

Generally, a complete fuel handling system would require:

• Immersion heaters in the HFO Storage Tank to maintain the HFO temperature in the tank.
• Outflow / Suction heaters in the tank, to raise the temperature to make it flowable.
• Inline Heaters in the pipeline before the burners, to raise the temperature for ignition.

Tristar designs and manufactures all the heaters required to optimise power utilisation for your plant. Please let us know the Tank Capacity and flow rates for us to design and quote for the heaters.

Product Details:

Stainless Steel Immersion Heater are used to maintain and raise the temperature of liquids in tanks or process vessels. These are installed preferably at a level below the outlet of the tank / vessel so that the heater is fully submerged in the liquid.

Customised heater capacities to suit applcaition:

• Low watt densities to protect the product and ensure uniform heating.
• Safety features -Thermostat or RTD as per requirement.

Additional Information:

• Production Capacity: 200
• Delivery Time: 3-4 WEEKS
• Packaging Details: WOODEN BOX

Product Details:

Oil Immersion Heaters are designed for direct contact heating of fluid. They are immersed in fluid to be heated and hence heat transfer efficiency is at its optimal. Immersion Heaters can be used to heat gasses or fluid ranging from water to corrosive solutions, oils with varying viscosities in an open or enclosed tank.

Immersion Heaters are also known as Mat or Floor Heaters and are used to maintain or raise the temperature of liquids in tanks or process vessels. These have to be installed at a level below the outlet of the tank / vessel so that the heaters is fully submerged in the liquid at all times.

Tristar Immersion Heaters are available in Tubular as well as cartridge type. Within tubular we have a range of tube diameters to suit your application watt density, similarly in cartridge type we can provide Open Bobbin type or SS Sheath cartridge type.

Tristar Heaters are available in various mounting options– Threaded Screw plug , Over the Side, Flange – Standard and customised.

Product Details:

Industrial Immrsion Heater are used to maintain and raise the temperature of liquids in tanks or process vessels. These are installed preferably at a level below the outlet of the tank / vessel so that the heater is fully submerged in the liquid.

Product Details:

Immersion Heater are used to maintain the temperature of liquids in tanks or process vessels. These are installed preferably at a level below the outlet of the tank / vessel so that the heater is fully submerged in the liquid. The Capacities as required by the client can be customized and built as per the project requirements. The capacities of these heaters are from 3 KW to 24 KW.

Features:

• Designed for direct contact heating of fluids including gases
• Used to maintain or raise temperature of fluids in tanks or process vessels
• Element construction - Tubular or Cartridge
• Connection type -Threaded screw plug/ Flanged/ Over the side

Advantages of Immersion Heater:

• Customized to suit your requirements taking into consideration process parameters
• Optimal watt density for long trouble free life, no charring/ coking of fluid
• Even Heat distribution over the surface of the element avoiding hot spots
• Easily replaceable without dismantling the heater body or emptying the contents of tank, feature on request
• Various temperature control and measurement devices
• Passivated components for use in corrosive solutions, on request
• Approved Weather Proof (IP 55) and Explosion Proof (IP 66) enclosures, on request
• 1 kW to 200 kW single heater, higher capacities can be designed and manufactured

Applications:

• Used to maintain the temperature of liquids in tanks or process vessels